Alps Electric ALPS MD-2300 Driver
As previously posted on March 31, Alps Electric North America, for the MD Series Printers models MD/ / / / / respectively. Full selection for Alps MD and MD series printers. Alps ink cartridges for microdry printer. cartridges and Alps paper for the Alps MD Series MicroDry ink printers including: MD, MD, MD, MD, MD, MD color printers. Alps and Microdry are registered trademarks of ALPS Electric Co. Product ReviewsAlps MD Standard Thermal Printer . The printer is old and is no longer supported on the alps electric website, also, it is parallel so you.
|Supported systems:||Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista|
|Price:||Free* [*Free Registration Required]|
Alps Electric ALPS MD-2300 Driver
Load a sheet of white laser paper.
Drivers - Printers - Alps Electric - Download
The printer should start printing a series of letters, numbers, horizontal lines and a black solid bar at the bottom of the sheet. Once this test page is completed, turn the printer off to stop the Alps Electric ALPS MD-2300. Looking at the black bar, it should be totally solid black. If one or more white thin lines are noticed on this bar, then the print head has dead elements, which cause the color lines or gaps on your normal printouts.
PHOTO QUALITY PAPER FOR MD-2300 & MD-1300 20-SHEETS 8.5X11 Specs
If this is the case, the printer needs to be exchanged. Please contact the RMA department at to arrange an exchange order.
However, instead of getting a black solid bar at the bottom of the sheet, there should be two bars with a group of horizontal lines each. Alps Electric ALPS MD-2300 at those bars, the horizontal lines should be evenly printed. If some portions of those lines are missing, then that indicates the print head has dead elements, which cause the color lines or gaps on your normal printouts.
Top of page Are you using the correct ink cartridge for the chosen printing medium? Are you printing on a rough or special surface such as overhead transparency film, iron-on transfer Alps Electric ALPS MD-2300 Resulting in gaps or distortions. In such a case, use a halftone setting appropriate for the image.
Top of page Are you printing on paper made for ink jet printer? They are coated to accept the liquid inks and to promote drying.
The Alps Electric ALPS MD-2300 Series uses a thermal transfer process and is not compatible with the coated papers. As a general rule of thumb if the media is made to be used in a laser printer it will work in the ALPS printers. Are you printing on envelopes? Around the flap area, there is a change of thickness.
This will cause print degradation in that area. The print head cannot compensate for that thickness change. Are you printing on the wrong side of the paper? Particularly with the Photographic Quality Paper, take care not to print on the back of the while using the Photo ink cartridges.
- free drivers from Alps Electric
The ribbons will break. Top of page The error message "The printer model detected is not compatible with this printer driver" shows up when trying to print with my MDP o The printer needs to be initialized properly with the Dye Sublimation key. Turn off the computer and printer, and then disconnect the printer cable and power cord from the printer. Remove the rectangular plastic connector cover if present thats located to the right Alps Electric ALPS MD-2300 the printer connector on the back of the printer.
- [Alps Printer Driver download Center]- for Windows 7,8,XP,Vista
- ALPS MD-2xxx / MD-4xxx Printer Listing
- PHOTO QUALITY PAPER FOR MD & MD SHEETS X11 Specs - CNET
- ALPS MD-2000, MD-2010, MD-2300, MD-4000 Printers
- ALPS MD- Troubleshooting Tips for the PC
- Troubleshooting Tips for the PC
- Alps Electric
Grab the black tab at the bottom of the connector cover, pull it up, and twist it until Alps Electric ALPS MD-2300 breaks free, revealing the accessory connector beneath. Plug the Dye Sublimation Upgrade Kits electronic key Alps Electric ALPS MD-2300 the accessory connector with the notched corner of the key on top, as shown in Figure 1 below.
The connector only fits one way. Reconnect the power and printer cable, and make sure they are secure.
Alps ink cartridges and Alps paper supplies for Alps Microdry series printers
Load the printer with standard Micro Dry ink cartridges cyan, magenta, yellow and black. DO NOT load the special dye sublimation ink cartridges at this time. Turn ON the printer and wait for the Power and Ready lights to stay solid green.
The printer now prints a test page that gives the product name as MDP instead of MD and includes Dye-Sublimation Printing on the printed list of features. Do not remove the electronic key. The printer driver should be installed next.
Driver Downloads Printer does not print or stops while printing Is the printer turned on? Is the front cover closed properly? Are you using the wrong cartridges?
Is the "Ready" light off? Are you using the correct cable?